Windows are made from dimensions or from templates supplied.
- If dimensions are given make sure they are of the window required and not of the actual opening. An allowance of 1 to 1 .5mm should be made to allow window to fit in aperture. If window angles are other than 90 degrees then a template is required.
- If templates are supplied they should be made of a ply or hardboard material. If holes are cut out of a boat then the template should be made so as to fit neatly into aperture. Indicate on templates the top outside face. If port and starboard windows are the same then only one template is required as windows will be made as pairs. When deciding on sliding windows be sure to make the top and bottom parallel.
- All windows are made to dimensions or template with a tolerance of plus nil minus 2mm.
Medium Duty Window Pan 404
• Same frame used for fixed and sliding window
• Large 16mm flange
• Fixing holes in outer flange
• Radius corners (63mm)
• Mitred corners
• Single slider only (internal track)
• Available as hopper window • Internal clamp ring (option)
• Screw cover to suit outer flange and clamp ring
• Available as internal cupboard door
• Suits all wall thicknesses
Glazing: up to 6mm
• Acrylic
• Polycarbonate (Lexan)
• Toughened Safety Glass
• Laminated Safety Glass
• Same frame used for fixed and sliding window
• Large 16mm flange
• Fixing holes in outer flange
• Radius corners (63mm)
• Mitred corners
• Single slider only (internal track)
• Available as hopper window • Internal clamp ring (option)
• Screw cover to suit outer flange and clamp ring
• Available as internal cupboard door
• Suits all wall thicknesses
Glazing: up to 6mm
• Acrylic
• Polycarbonate (Lexan)
• Toughened Safety Glass
• Laminated Safety Glass
------------------------------------
- Heavy Duty Window Pan 401 & 411
- • Heavy duty frame designed to suit larger vessels
- • Same frame used for fixed and sliding window
- • Radius corners (75mm or 100mm) Outs
- • Mitred corners o All joints welded
- • 16mm flange (Pan 401)
- • 30mm flange (Pan 411)
- • Fixing holes in outer flange
- • Internal clamp ring (option)
- • Screw cover to suit outer flange and clamp ring
- • Available as hopper window Sliding window available as single or double slider
- • Suits all wall thicknesses
- Glazing: fixed up to 12mm - Slider up to 6mm
- • Acrylic
- • Polycarbonate (Lexan)
- • Toughened Safety Glass
- • Laminated Safety Glass
------------------------------------
For corner cutout in superstructure, it is important to select window frame and check corner radius prior to cutting out aperature.
Medium Duty Radius Pan 404
Either 50mm or 63mm
Heavy Duty Radius Pan 401 & 411
Either 75mm or 100mm
